1972 Fiat 124 vs. 2007 Nissan Tiida
To start off, 2007 Nissan Tiida is newer by 35 year(s). Which means there will be less support and parts availability for 1972 Fiat 124. In addition, the cost of maintenance, including insurance, on 1972 Fiat 124 would be higher. At 1,756 cc (4 cylinders), 1972 Fiat 124 is equipped with a bigger engine. In terms of performance, 1972 Fiat 124 (116 HP @ 6000 RPM) has 8 more horse power than 2007 Nissan Tiida. (108 HP @ 6000 RPM). In normal driving conditions, 1972 Fiat 124 should accelerate faster than 2007 Nissan Tiida.
Because 1972 Fiat 124 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1972 Fiat 124. However, in wet, icy, snow, or gravel driving conditions, 2007 Nissan Tiida, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, both vehicles can yield 153 Nm of torque. So under normal driving conditions, the ability to climb up hills and pull heavy equipment should be relatively similar for both vehicles.
Compare all specifications:
1972 Fiat 124 | 2007 Nissan Tiida | |
Make | Fiat | Nissan |
Model | 124 | Tiida |
Year Released | 1972 | 2007 |
Engine Position | Front | Front |
Engine Size | 1756 cc | 1596 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 116 HP | 108 HP |
Engine RPM | 6000 RPM | 6000 RPM |
Torque | 153 Nm | 153 Nm |
Torque RPM | 4000 RPM | 3500 RPM |
Engine Compression Ratio | 9.8:1 | 10.7:1 |
Top Speed | 167 km/hour | 190 km/hour |
Drive Type | Rear | Front |
Transmission Type | Manual | Manual |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Length | 4140 mm | 4210 mm |
Vehicle Width | 1680 mm | 1700 mm |
Vehicle Height | 1350 mm | 1550 mm |
Wheelbase Size | 2350 mm | 2610 mm |