1972 Fiat 128 vs. 2006 Toyota Sequoia
To start off, 2006 Toyota Sequoia is newer by 34 year(s). Which means there will be less support and parts availability for 1972 Fiat 128. In addition, the cost of maintenance, including insurance, on 1972 Fiat 128 would be higher. At 4,671 cc (8 cylinders), 2006 Toyota Sequoia is equipped with a bigger engine. In terms of performance, 2006 Toyota Sequoia (273 HP @ 5400 RPM) has 210 more horse power than 1972 Fiat 128. (63 HP @ 6000 RPM) In normal driving conditions, 2006 Toyota Sequoia should accelerate faster than 1972 Fiat 128. With that said, vehicle weight also plays an important factor in acceleration. 2006 Toyota Sequoia weights approximately 535 kg more than 1972 Fiat 128. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 2006 Toyota Sequoia (426 Nm @ 3400 RPM) has 343 more torque (in Nm) than 1972 Fiat 128. (83 Nm @ 4400 RPM). This means 2006 Toyota Sequoia will have an easier job in driving up hills or pulling heavy equipment than 1972 Fiat 128.
Compare all specifications:
1972 Fiat 128 | 2006 Toyota Sequoia | |
Make | Fiat | Toyota |
Model | 128 | Sequoia |
Year Released | 1972 | 2006 |
Engine Position | Front | Front |
Engine Size | 1115 cc | 4671 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Horse Power | 63 HP | 273 HP |
Engine RPM | 6000 RPM | 5400 RPM |
Torque | 83 Nm | 426 Nm |
Torque RPM | 4400 RPM | 3400 RPM |
Engine Bore Size | 80 mm | 94 mm |
Engine Stroke Size | 55.5 mm | 84 mm |
Engine Compression Ratio | 8.8:1 | 10.0:1 |
Fuel Type | Gasoline | Gasoline |
Number of Seats | 4 seats | 8 seats |
Number of Doors | 4 doors | 5 doors |
Vehicle Weight | 820 kg | 1355 kg |
Vehicle Length | 3820 mm | 5190 mm |
Vehicle Width | 1570 mm | 2010 mm |
Vehicle Height | 1320 mm | 1860 mm |
Wheelbase Size | 2240 mm | 3010 mm |
Fuel Tank Capacity | 50 L | 99 L |