1972 Fiat 128 vs. 2010 Pontiac G6
To start off, 2010 Pontiac G6 is newer by 38 year(s). Which means there will be less support and parts availability for 1972 Fiat 128. In addition, the cost of maintenance, including insurance, on 1972 Fiat 128 would be higher. At 3,500 cc (6 cylinders), 2010 Pontiac G6 is equipped with a bigger engine. In terms of performance, 2010 Pontiac G6 (219 HP @ 5900 RPM) has 156 more horse power than 1972 Fiat 128. (63 HP @ 6000 RPM) In normal driving conditions, 2010 Pontiac G6 should accelerate faster than 1972 Fiat 128. With that said, vehicle weight also plays an important factor in acceleration. 2010 Pontiac G6 weights approximately 734 kg more than 1972 Fiat 128. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 2010 Pontiac G6 (297 Nm @ 3200 RPM) has 214 more torque (in Nm) than 1972 Fiat 128. (83 Nm @ 4400 RPM). This means 2010 Pontiac G6 will have an easier job in driving up hills or pulling heavy equipment than 1972 Fiat 128.
Compare all specifications:
1972 Fiat 128 | 2010 Pontiac G6 | |
Make | Fiat | Pontiac |
Model | 128 | G6 |
Year Released | 1972 | 2010 |
Engine Position | Front | Front |
Engine Size | 1115 cc | 3500 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 63 HP | 219 HP |
Engine RPM | 6000 RPM | 5900 RPM |
Torque | 83 Nm | 297 Nm |
Torque RPM | 4400 RPM | 3200 RPM |
Engine Bore Size | 80 mm | 87.9 mm |
Engine Stroke Size | 55.5 mm | 94.5 mm |
Engine Compression Ratio | 8.8:1 | 9.2:1 |
Fuel Type | Gasoline | Gasoline |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 820 kg | 1554 kg |
Vehicle Length | 3820 mm | 4810 mm |
Vehicle Width | 1570 mm | 1800 mm |
Vehicle Height | 1320 mm | 1460 mm |
Wheelbase Size | 2240 mm | 2860 mm |
Fuel Tank Capacity | 50 L | 61 L |