1972 Fiat 130 vs. 2010 Suzuki Equator
To start off, 2010 Suzuki Equator is newer by 38 year(s). Which means there will be less support and parts availability for 1972 Fiat 130. In addition, the cost of maintenance, including insurance, on 1972 Fiat 130 would be higher. At 3,238 cc (6 cylinders), 1972 Fiat 130 is equipped with a bigger engine. In terms of performance, 1972 Fiat 130 (163 HP @ 5600 RPM) has 13 more horse power than 2010 Suzuki Equator. (150 HP @ 5600 RPM). In normal driving conditions, 1972 Fiat 130 should accelerate faster than 2010 Suzuki Equator. With that said, vehicle weight also plays an important factor in acceleration. 1972 Fiat 130 weights approximately 625 kg more than 2010 Suzuki Equator. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1972 Fiat 130 (255 Nm @ 3400 RPM) has 84 more torque (in Nm) than 2010 Suzuki Equator. (171 Nm @ 4000 RPM). This means 1972 Fiat 130 will have an easier job in driving up hills or pulling heavy equipment than 2010 Suzuki Equator.
Compare all specifications:
1972 Fiat 130 | 2010 Suzuki Equator | |
Make | Fiat | Suzuki |
Model | 130 | Equator |
Year Released | 1972 | 2010 |
Engine Position | Front | Front |
Engine Size | 3238 cc | 2501 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 163 HP | 150 HP |
Engine RPM | 5600 RPM | 5600 RPM |
Torque | 255 Nm | 171 Nm |
Torque RPM | 3400 RPM | 4000 RPM |
Fuel Type | Gasoline | Gasoline |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1600 kg | 975 kg |
Vehicle Length | 4850 mm | 5250 mm |
Vehicle Width | 1770 mm | 1860 mm |
Vehicle Height | 1390 mm | 1790 mm |
Wheelbase Size | 2730 mm | 3200 mm |
Fuel Tank Capacity | 50 L | 80 L |