1972 Ford Gran Torino vs. 1980 Simca 1309

To start off, 1980 Simca 1309 is newer by 8 year(s). Which means there will be less support and parts availability for 1972 Ford Gran Torino. In addition, the cost of maintenance, including insurance, on 1972 Ford Gran Torino would be higher. At 4,097 cc (6 cylinders), 1972 Ford Gran Torino is equipped with a bigger engine. In terms of performance, 1972 Ford Gran Torino (95 HP @ 3600 RPM) has 8 more horse power than 1980 Simca 1309. (87 HP @ 5400 RPM). In normal driving conditions, 1972 Ford Gran Torino should accelerate faster than 1980 Simca 1309. With that said, vehicle weight also plays an important factor in acceleration. 1972 Ford Gran Torino weights approximately 748 kg more than 1980 Simca 1309. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1972 Ford Gran Torino is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1972 Ford Gran Torino. However, in wet, icy, snow, or gravel driving conditions, 1980 Simca 1309, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 Ford Gran Torino (245 Nm @ 1600 RPM) has 111 more torque (in Nm) than 1980 Simca 1309. (134 Nm @ 3000 RPM). This means 1972 Ford Gran Torino will have an easier job in driving up hills or pulling heavy equipment than 1980 Simca 1309. 1980 Simca 1309 has automatic transmission and 1972 Ford Gran Torino has manual transmission. 1972 Ford Gran Torino will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Simca 1309 will be easier to drive especially in heavy traffic.

Compare all specifications:

1972 Ford Gran Torino 1980 Simca 1309
Make Ford Simca
Model Gran Torino 1309
Year Released 1972 1980
Engine Position Front Front
Engine Size 4097 cc 1592 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 95 HP 87 HP
Engine RPM 3600 RPM 5400 RPM
Torque 245 Nm 134 Nm
Torque RPM 1600 RPM 3000 RPM
Engine Bore Size 93.5 mm 80.6 mm
Engine Stroke Size 99.3 mm 78 mm
Engine Compression Ratio 8.0:1 9.4:1
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Vehicle Weight 1858 kg 1110 kg
Vehicle Length 5470 mm 4260 mm
Vehicle Width 2010 mm 1690 mm
Vehicle Height 1400 mm 1410 mm
Wheelbase Size 3000 mm 2610 mm