1972 Ford Gran Torino vs. 2010 Ford Bantam

To start off, 2010 Ford Bantam is newer by 38 year(s). Which means there will be less support and parts availability for 1972 Ford Gran Torino. In addition, the cost of maintenance, including insurance, on 1972 Ford Gran Torino would be higher. At 4,097 cc (6 cylinders), 1972 Ford Gran Torino is equipped with a bigger engine. In terms of performance, 1972 Ford Gran Torino (95 HP @ 3600 RPM) has 1 more horse power than 2010 Ford Bantam. (94 HP @ 5500 RPM). In normal driving conditions, 1972 Ford Gran Torino should accelerate faster than 2010 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 1972 Ford Gran Torino weights approximately 874 kg more than 2010 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1972 Ford Gran Torino is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1972 Ford Gran Torino. However, in wet, icy, snow, or gravel driving conditions, 2010 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 Ford Gran Torino (245 Nm @ 1600 RPM) has 110 more torque (in Nm) than 2010 Ford Bantam. (135 Nm @ 2500 RPM). This means 1972 Ford Gran Torino will have an easier job in driving up hills or pulling heavy equipment than 2010 Ford Bantam.

Compare all specifications:

1972 Ford Gran Torino 2010 Ford Bantam
Make Ford Ford
Model Gran Torino Bantam
Year Released 1972 2010
Body Type Station Wagon Pickup
Engine Position Front Front
Engine Size 4097 cc 1597 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 95 HP 94 HP
Engine RPM 3600 RPM 5500 RPM
Torque 245 Nm 135 Nm
Torque RPM 1600 RPM 2500 RPM
Engine Bore Size 93.5 mm 82 mm
Engine Stroke Size 99.3 mm 75.5 mm
Engine Compression Ratio 8.0:1 9.5:1
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 5 seats 2 seats
Number of Doors 5 doors 2 doors
Vehicle Weight 1858 kg 984 kg
Vehicle Length 5470 mm 4280 mm
Vehicle Width 2010 mm 1470 mm
Vehicle Height 1400 mm 1640 mm
Wheelbase Size 3000 mm 2670 mm
Fuel Tank Capacity 76 L 54 L