1972 Ford Torino vs. 1963 Lancia Flavia

To start off, 1972 Ford Torino is newer by 9 year(s). Which means there will be less support and parts availability for 1963 Lancia Flavia. In addition, the cost of maintenance, including insurance, on 1963 Lancia Flavia would be higher. At 5,752 cc (8 cylinders), 1972 Ford Torino is equipped with a bigger engine. In terms of performance, 1972 Ford Torino (162 HP @ 4000 RPM) has 58 more horse power than 1963 Lancia Flavia. (104 HP @ 5600 RPM). In normal driving conditions, 1972 Ford Torino should accelerate faster than 1963 Lancia Flavia. With that said, vehicle weight also plays an important factor in acceleration. 1972 Ford Torino weights approximately 646 kg more than 1963 Lancia Flavia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1972 Ford Torino is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1972 Ford Torino. However, in wet, icy, snow, or gravel driving conditions, 1963 Lancia Flavia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 Ford Torino (374 Nm @ 2000 RPM) has 211 more torque (in Nm) than 1963 Lancia Flavia. (163 Nm @ 3500 RPM). This means 1972 Ford Torino will have an easier job in driving up hills or pulling heavy equipment than 1963 Lancia Flavia. 1972 Ford Torino has automatic transmission and 1963 Lancia Flavia has manual transmission. 1963 Lancia Flavia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1972 Ford Torino will be easier to drive especially in heavy traffic.

Compare all specifications:

1972 Ford Torino 1963 Lancia Flavia
Make Ford Lancia
Model Torino Flavia
Year Released 1972 1963
Engine Position Front Front
Engine Size 5752 cc 1800 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V boxer
Horse Power 162 HP 104 HP
Engine RPM 4000 RPM 5600 RPM
Torque 374 Nm 163 Nm
Torque RPM 2000 RPM 3500 RPM
Engine Bore Size 101.6 mm 88.1 mm
Engine Stroke Size 88.8 mm 74 mm
Engine Compression Ratio 8.6:1 9.0:1
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 5 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1707 kg 1061 kg
Vehicle Length 5180 mm 4470 mm
Vehicle Width 2020 mm 1640 mm
Vehicle Height 1320 mm 1350 mm
Wheelbase Size 2900 mm 2490 mm
Fuel Tank Capacity 87 L 48 L