1972 Ford Torino vs. 1966 Ginetta G11
To start off, 1972 Ford Torino is newer by 6 year(s). Which means there will be less support and parts availability for 1966 Ginetta G11. In addition, the cost of maintenance, including insurance, on 1966 Ginetta G11 would be higher. At 4,092 cc (6 cylinders), 1972 Ford Torino is equipped with a bigger engine. In terms of performance, 1972 Ford Torino (96 HP @ 3600 RPM) has 2 more horse power than 1966 Ginetta G11. (94 HP @ 5400 RPM). In normal driving conditions, 1972 Ford Torino should accelerate faster than 1966 Ginetta G11. With that said, vehicle weight also plays an important factor in acceleration. 1972 Ford Torino weights approximately 774 kg more than 1966 Ginetta G11. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1972 Ford Torino | 1966 Ginetta G11 | |
| Make | Ford | Ginetta |
| Model | Torino | G11 |
| Year Released | 1972 | 1966 |
| Engine Position | Front | Front |
| Engine Size | 4092 cc | 1788 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 96 HP | 94 HP |
| Engine RPM | 3600 RPM | 5400 RPM |
| Engine Bore Size | 93.5 mm | 80 mm |
| Engine Stroke Size | 99.3 mm | 89 mm |
| Engine Compression Ratio | 8.0:1 | 8.8:1 |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 5 seats | 2 seats |
| Number of Doors | 4 doors | 2 doors |
| Vehicle Weight | 1650 kg | 876 kg |
| Vehicle Length | 5470 mm | 3990 mm |
| Vehicle Width | 2020 mm | 1510 mm |
| Wheelbase Size | 2760 mm | 2290 mm |
