1972 Holden Torana vs. 1957 Holden FE
To start off, 1972 Holden Torana is newer by 15 year(s). Which means there will be less support and parts availability for 1957 Holden FE. In addition, the cost of maintenance, including insurance, on 1957 Holden FE would be higher. At 2,166 cc (6 cylinders), 1957 Holden FE is equipped with a bigger engine. In terms of performance, 1972 Holden Torana (79 HP @ 5500 RPM) has 19 more horse power than 1957 Holden FE. (60 HP @ 4000 RPM). In normal driving conditions, 1972 Holden Torana should accelerate faster than 1957 Holden FE. With that said, vehicle weight also plays an important factor in acceleration. 1957 Holden FE weights approximately 50 kg more than 1972 Holden Torana.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1957 Holden FE (150 Nm @ 1200 RPM) has 19 more torque (in Nm) than 1972 Holden Torana. (131 Nm @ 3200 RPM). This means 1957 Holden FE will have an easier job in driving up hills or pulling heavy equipment than 1972 Holden Torana.
Compare all specifications:
1972 Holden Torana | 1957 Holden FE | |
Make | Holden | Holden |
Model | Torana | FE |
Year Released | 1972 | 1957 |
Engine Position | Front | Front |
Engine Size | 1599 cc | 2166 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 79 HP | 60 HP |
Engine RPM | 5500 RPM | 4000 RPM |
Torque | 131 Nm | 150 Nm |
Torque RPM | 3200 RPM | 1200 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 930 kg | 980 kg |
Vehicle Length | 4130 mm | 4480 mm |
Vehicle Width | 1610 mm | 1710 mm |
Vehicle Height | 1360 mm | 1560 mm |
Wheelbase Size | 2440 mm | 2670 mm |