1972 Jensen Interceptor vs. 1990 Mazda 626
To start off, 1990 Mazda 626 is newer by 18 year(s). Which means there will be less support and parts availability for 1972 Jensen Interceptor. In addition, the cost of maintenance, including insurance, on 1972 Jensen Interceptor would be higher. At 7,206 cc (8 cylinders), 1972 Jensen Interceptor is equipped with a bigger engine. In terms of performance, 1972 Jensen Interceptor (284 HP @ 4800 RPM) has 195 more horse power than 1990 Mazda 626. (89 HP @ 5500 RPM). In normal driving conditions, 1972 Jensen Interceptor should accelerate faster than 1990 Mazda 626. With that said, vehicle weight also plays an important factor in acceleration. 1972 Jensen Interceptor weights approximately 698 kg more than 1990 Mazda 626. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1972 Jensen Interceptor is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1972 Jensen Interceptor. However, in wet, icy, snow, or gravel driving conditions, 1990 Mazda 626, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 Jensen Interceptor (515 Nm @ 3200 RPM) has 380 more torque (in Nm) than 1990 Mazda 626. (135 Nm @ 2500 RPM). This means 1972 Jensen Interceptor will have an easier job in driving up hills or pulling heavy equipment than 1990 Mazda 626. 1972 Jensen Interceptor has automatic transmission and 1990 Mazda 626 has manual transmission. 1990 Mazda 626 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1972 Jensen Interceptor will be easier to drive especially in heavy traffic.
Compare all specifications:
1972 Jensen Interceptor | 1990 Mazda 626 | |
Make | Jensen | Mazda |
Model | Interceptor | 626 |
Year Released | 1972 | 1990 |
Engine Position | Front | Front |
Engine Size | 7206 cc | 1789 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 3 valves |
Horse Power | 284 HP | 89 HP |
Engine RPM | 4800 RPM | 5500 RPM |
Torque | 515 Nm | 135 Nm |
Torque RPM | 3200 RPM | 2500 RPM |
Engine Bore Size | 109.7 mm | 86 mm |
Engine Stroke Size | 95.3 mm | 77 mm |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1818 kg | 1120 kg |
Vehicle Length | 4780 mm | 4520 mm |
Vehicle Width | 1760 mm | 1700 mm |
Vehicle Height | 1350 mm | 1370 mm |
Wheelbase Size | 2670 mm | 2580 mm |