1972 Jensen Interceptor vs. 1995 Mazda MX-3
To start off, 1995 Mazda MX-3 is newer by 23 year(s). Which means there will be less support and parts availability for 1972 Jensen Interceptor. In addition, the cost of maintenance, including insurance, on 1972 Jensen Interceptor would be higher. At 7,206 cc (8 cylinders), 1972 Jensen Interceptor is equipped with a bigger engine. In terms of performance, 1972 Jensen Interceptor (284 HP @ 4800 RPM) has 178 more horse power than 1995 Mazda MX-3. (106 HP @ 6200 RPM). In normal driving conditions, 1972 Jensen Interceptor should accelerate faster than 1995 Mazda MX-3. With that said, vehicle weight also plays an important factor in acceleration. 1972 Jensen Interceptor weights approximately 759 kg more than 1995 Mazda MX-3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1972 Jensen Interceptor is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1972 Jensen Interceptor. However, in wet, icy, snow, or gravel driving conditions, 1995 Mazda MX-3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 Jensen Interceptor (515 Nm @ 3200 RPM) has 381 more torque (in Nm) than 1995 Mazda MX-3. (134 Nm @ 3600 RPM). This means 1972 Jensen Interceptor will have an easier job in driving up hills or pulling heavy equipment than 1995 Mazda MX-3. 1972 Jensen Interceptor has automatic transmission and 1995 Mazda MX-3 has manual transmission. 1995 Mazda MX-3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1972 Jensen Interceptor will be easier to drive especially in heavy traffic.
Compare all specifications:
1972 Jensen Interceptor | 1995 Mazda MX-3 | |
Make | Jensen | Mazda |
Model | Interceptor | MX-3 |
Year Released | 1972 | 1995 |
Engine Position | Front | Front |
Engine Size | 7206 cc | 1598 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 284 HP | 106 HP |
Engine RPM | 4800 RPM | 6200 RPM |
Torque | 515 Nm | 134 Nm |
Torque RPM | 3200 RPM | 3600 RPM |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 4 seats | 4 seats |
Number of Doors | 2 doors | 3 doors |
Vehicle Weight | 1818 kg | 1059 kg |
Vehicle Length | 4780 mm | 4230 mm |
Vehicle Width | 1760 mm | 1700 mm |
Vehicle Height | 1350 mm | 1320 mm |
Wheelbase Size | 2670 mm | 2460 mm |
Fuel Tank Capacity | 90 L | 65 L |