1972 Lancia Beta vs. 2010 Chrysler 300

To start off, 2010 Chrysler 300 is newer by 38 year(s). Which means there will be less support and parts availability for 1972 Lancia Beta. In addition, the cost of maintenance, including insurance, on 1972 Lancia Beta would be higher. At 3,500 cc (6 cylinders), 2010 Chrysler 300 is equipped with a bigger engine. In terms of performance, 2010 Chrysler 300 (250 HP @ 6400 RPM) has 140 more horse power than 1972 Lancia Beta. (110 HP @ 6000 RPM) In normal driving conditions, 2010 Chrysler 300 should accelerate faster than 1972 Lancia Beta. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler 300 weights approximately 725 kg more than 1972 Lancia Beta. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 Chrysler 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Chrysler 300. However, in wet, icy, snow, or gravel driving conditions, 1972 Lancia Beta, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler 300 (339 Nm @ 3800 RPM) has 194 more torque (in Nm) than 1972 Lancia Beta. (145 Nm @ 3000 RPM). This means 2010 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 1972 Lancia Beta. 2010 Chrysler 300 has automatic transmission and 1972 Lancia Beta has manual transmission. 1972 Lancia Beta will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler 300 will be easier to drive especially in heavy traffic.

Compare all specifications:

1972 Lancia Beta 2010 Chrysler 300
Make Lancia Chrysler
Model Beta 300
Year Released 1972 2010
Body Type Coupe Sedan
Engine Position Front Front
Engine Size 1755 cc 3500 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Horse Power 110 HP 250 HP
Engine RPM 6000 RPM 6400 RPM
Torque 145 Nm 339 Nm
Torque RPM 3000 RPM 3800 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Doors 2 doors 4 doors
Vehicle Weight 1000 kg 1725 kg
Vehicle Length 4000 mm 4999 mm
Vehicle Width 1660 mm 1882 mm
Vehicle Height 1290 mm 1483 mm
Wheelbase Size 2360 mm 3048 mm
Fuel Tank Capacity 64 L 68 L