1972 Lancia Fulvia vs. 2008 Mazda 3
To start off, 2008 Mazda 3 is newer by 36 year(s). Which means there will be less support and parts availability for 1972 Lancia Fulvia. In addition, the cost of maintenance, including insurance, on 1972 Lancia Fulvia would be higher. At 1,598 cc (4 cylinders), 2008 Mazda 3 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mazda 3 weights approximately 231 kg more than 1972 Lancia Fulvia.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 Lancia Fulvia (153 Nm @ 4500 RPM) has 7 more torque (in Nm) than 2008 Mazda 3. (146 Nm @ 4000 RPM). This means 1972 Lancia Fulvia will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda 3.
Compare all specifications:
1972 Lancia Fulvia | 2008 Mazda 3 | |
Make | Lancia | Mazda |
Model | Fulvia | 3 |
Year Released | 1972 | 2008 |
Engine Position | Front | Front |
Engine Size | 1584 cc | 1598 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 112 HP | 0 HP |
Torque | 153 Nm | 146 Nm |
Torque RPM | 4500 RPM | 4000 RPM |
Engine Bore Size | 82 mm | 78 mm |
Engine Stroke Size | 75 mm | 83.6 mm |
Engine Compression Ratio | 10.5:1 | 10.0:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 960 kg | 1191 kg |
Vehicle Length | 4150 mm | 4500 mm |
Vehicle Width | 1580 mm | 1760 mm |
Vehicle Height | 1290 mm | 1470 mm |
Wheelbase Size | 2340 mm | 2650 mm |
Fuel Tank Capacity | 70 L | 55 L |