1972 Morgan 4 vs. 2010 Chrysler Sebring
To start off, 2010 Chrysler Sebring is newer by 38 year(s). Which means there will be less support and parts availability for 1972 Morgan 4. In addition, the cost of maintenance, including insurance, on 1972 Morgan 4 would be higher. At 2,360 cc (4 cylinders), 2010 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring (168 HP @ 6000 RPM) has 83 more horse power than 1972 Morgan 4. (85 HP @ 5500 RPM) In normal driving conditions, 2010 Chrysler Sebring should accelerate faster than 1972 Morgan 4. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 1250 kg more than 1972 Morgan 4. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1972 Morgan 4 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1972 Morgan 4. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Sebring (220 Nm @ 4400 RPM) has 85 more torque (in Nm) than 1972 Morgan 4. (135 Nm @ 3600 RPM). This means 2010 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1972 Morgan 4. 2010 Chrysler Sebring has automatic transmission and 1972 Morgan 4 has manual transmission. 1972 Morgan 4 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
1972 Morgan 4 | 2010 Chrysler Sebring | |
Make | Morgan | Chrysler |
Model | 4 | Sebring |
Year Released | 1972 | 2010 |
Engine Position | Front | Front |
Engine Size | 1597 cc | 2360 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 85 HP | 168 HP |
Engine RPM | 5500 RPM | 6000 RPM |
Torque | 135 Nm | 220 Nm |
Torque RPM | 3600 RPM | 4400 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 660 kg | 1910 kg |
Vehicle Length | 3670 mm | 4860 mm |
Vehicle Width | 1430 mm | 1850 mm |
Vehicle Height | 1300 mm | 1500 mm |
Wheelbase Size | 2450 mm | 2770 mm |