1973 AC 428 vs. 1990 Beijing BJ 212
To start off, 1990 Beijing BJ 212 is newer by 17 year(s). Which means there will be less support and parts availability for 1973 AC 428. In addition, the cost of maintenance, including insurance, on 1973 AC 428 would be higher. At 7,002 cc (8 cylinders), 1973 AC 428 is equipped with a bigger engine. In terms of performance, 1973 AC 428 (298 HP @ 4600 RPM) has 211 more horse power than 1990 Beijing BJ 212. (87 HP @ 4250 RPM). In normal driving conditions, 1973 AC 428 should accelerate faster than 1990 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1990 Beijing BJ 212 weights approximately 100 kg more than 1973 AC 428.
Because 1990 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 1973 AC 428. In wet, icy, snow, or gravel driving conditions, 1990 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1973 AC 428 (639 Nm @ 2800 RPM) has 458 more torque (in Nm) than 1990 Beijing BJ 212. (181 Nm @ 2000 RPM). This means 1973 AC 428 will have an easier job in driving up hills or pulling heavy equipment than 1990 Beijing BJ 212.
Compare all specifications:
| 1973 AC 428 | 1990 Beijing BJ 212 | |
| Make | AC | Beijing |
| Model | 428 | BJ 212 |
| Year Released | 1973 | 1990 |
| Engine Size | 7002 cc | 2066 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 298 HP | 87 HP |
| Engine RPM | 4600 RPM | 4250 RPM |
| Torque | 639 Nm | 181 Nm |
| Torque RPM | 2800 RPM | 2000 RPM |
| Fuel Type | Gasoline | Diesel |
| Drive Type | Rear | 4WD |
| Transmission Type | Manual | Manual |
| Vehicle Weight | 1430 kg | 1530 kg |
| Vehicle Length | 4430 mm | 3910 mm |
| Vehicle Width | 1710 mm | 1760 mm |
| Vehicle Height | 1310 mm | 1880 mm |
| Wheelbase Size | 2450 mm | 2310 mm |
