1973 Austin Allegro vs. 2010 Toyota iQ
To start off, 2010 Toyota iQ is newer by 37 year(s). Which means there will be less support and parts availability for 1973 Austin Allegro. In addition, the cost of maintenance, including insurance, on 1973 Austin Allegro would be higher. At 1,747 cc (4 cylinders), 1973 Austin Allegro is equipped with a bigger engine. In terms of performance, 1973 Austin Allegro (80 HP @ 5000 RPM) has 13 more horse power than 2010 Toyota iQ. (67 HP @ 6000 RPM). In normal driving conditions, 1973 Austin Allegro should accelerate faster than 2010 Toyota iQ. With that said, vehicle weight also plays an important factor in acceleration. 2010 Toyota iQ weights approximately 22 kg more than 1973 Austin Allegro.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1973 Austin Allegro (137 Nm @ 2600 RPM) has 39 more torque (in Nm) than 2010 Toyota iQ. (98 Nm @ 4800 RPM). This means 1973 Austin Allegro will have an easier job in driving up hills or pulling heavy equipment than 2010 Toyota iQ.
Compare all specifications:
1973 Austin Allegro | 2010 Toyota iQ | |
Make | Austin | Toyota |
Model | Allegro | iQ |
Year Released | 1973 | 2010 |
Engine Position | Front | Front |
Engine Size | 1747 cc | 995 cc |
Engine Cylinders | 4 cylinders | 3 cylinders |
Engine Type | in-line | in-line |
Horse Power | 80 HP | 67 HP |
Engine RPM | 5000 RPM | 6000 RPM |
Torque | 137 Nm | 98 Nm |
Torque RPM | 2600 RPM | 4800 RPM |
Drive Type | Front | Front |
Transmission Type | Manual | CVT |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 2 doors | 3 doors |
Vehicle Weight | 838 kg | 860 kg |
Vehicle Length | 3860 mm | 2985 mm |
Vehicle Width | 1620 mm | 1680 mm |
Vehicle Height | 1400 mm | 1500 mm |
Wheelbase Size | 2440 mm | 2000 mm |
Fuel Tank Capacity | 47 L | 32 L |