1973 BMW 3 vs. 1957 Toyota Crown

To start off, 1973 BMW 3 is newer by 16 year(s). Which means there will be less support and parts availability for 1957 Toyota Crown. In addition, the cost of maintenance, including insurance, on 1957 Toyota Crown would be higher. At 3,153 cc (6 cylinders), 1973 BMW 3 is equipped with a bigger engine. In terms of performance, 1973 BMW 3 (203 HP @ 5600 RPM) has 154 more horse power than 1957 Toyota Crown. (49 HP @ 4400 RPM). In normal driving conditions, 1973 BMW 3 should accelerate faster than 1957 Toyota Crown. With that said, vehicle weight also plays an important factor in acceleration. 1973 BMW 3 weights approximately 20 kg more than 1957 Toyota Crown. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1973 BMW 3 (287 Nm @ 4200 RPM) has 179 more torque (in Nm) than 1957 Toyota Crown. (108 Nm @ 2800 RPM). This means 1973 BMW 3 will have an easier job in driving up hills or pulling heavy equipment than 1957 Toyota Crown.

Compare all specifications:

1973 BMW 3 1957 Toyota Crown
Make BMW Toyota
Model 3 Crown
Year Released 1973 1957
Engine Position Front Front
Engine Size 3153 cc 1453 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 203 HP 49 HP
Engine RPM 5600 RPM 4400 RPM
Torque 287 Nm 108 Nm
Torque RPM 4200 RPM 2800 RPM
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 4 seats 5 seats
Vehicle Weight 1270 kg 1250 kg
Vehicle Length 4640 mm 4370 mm
Vehicle Width 1740 mm 1700 mm
Vehicle Height 1380 mm 1550 mm
Wheelbase Size 2510 mm 2540 mm