1973 BMW 3 vs. 1980 Honda Ballade
To start off, 1980 Honda Ballade is newer by 7 year(s). Which means there will be less support and parts availability for 1973 BMW 3. In addition, the cost of maintenance, including insurance, on 1973 BMW 3 would be higher. At 3,153 cc (6 cylinders), 1973 BMW 3 is equipped with a bigger engine. In terms of performance, 1973 BMW 3 (203 HP) has 129 more horse power than 1980 Honda Ballade. (74 HP). In normal driving conditions, 1973 BMW 3 should accelerate faster than 1980 Honda Ballade. With that said, vehicle weight also plays an important factor in acceleration. 1973 BMW 3 weights approximately 455 kg more than 1980 Honda Ballade. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1973 BMW 3 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1973 BMW 3. However, in wet, icy, snow, or gravel driving conditions, 1980 Honda Ballade, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1973 BMW 3 (287 Nm @ 4200 RPM) has 167 more torque (in Nm) than 1980 Honda Ballade. (120 Nm @ 3500 RPM). This means 1973 BMW 3 will have an easier job in driving up hills or pulling heavy equipment than 1980 Honda Ballade. 1980 Honda Ballade has automatic transmission and 1973 BMW 3 has manual transmission. 1973 BMW 3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Honda Ballade will be easier to drive especially in heavy traffic.
Compare all specifications:
1973 BMW 3 | 1980 Honda Ballade | |
Make | BMW | Honda |
Model | 3 | Ballade |
Year Released | 1973 | 1980 |
Engine Position | Front | Front |
Engine Size | 3153 cc | 1488 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 3 valves |
Horse Power | 203 HP | 74 HP |
Torque | 287 Nm | 120 Nm |
Torque RPM | 4200 RPM | 3500 RPM |
Engine Bore Size | 89.3 mm | 74 mm |
Engine Stroke Size | 84 mm | 86.5 mm |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1270 kg | 815 kg |
Vehicle Length | 4640 mm | 4150 mm |
Vehicle Width | 1740 mm | 1610 mm |
Vehicle Height | 1380 mm | 1350 mm |
Wheelbase Size | 2510 mm | 2330 mm |