1973 BMW 525 vs. 1968 Holden Belmont

To start off, 1973 BMW 525 is newer by 5 year(s). Which means there will be less support and parts availability for 1968 Holden Belmont. In addition, the cost of maintenance, including insurance, on 1968 Holden Belmont would be higher. At 2,494 cc (6 cylinders), 1973 BMW 525 is equipped with a bigger engine. In terms of performance, 1973 BMW 525 (143 HP @ 6000 RPM) has 67 more horse power than 1968 Holden Belmont. (76 HP @ 4400 RPM). In normal driving conditions, 1973 BMW 525 should accelerate faster than 1968 Holden Belmont. With that said, vehicle weight also plays an important factor in acceleration. 1973 BMW 525 weights approximately 180 kg more than 1968 Holden Belmont. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1973 BMW 525 (208 Nm @ 4000 RPM) has 45 more torque (in Nm) than 1968 Holden Belmont. (163 Nm @ 4400 RPM). This means 1973 BMW 525 will have an easier job in driving up hills or pulling heavy equipment than 1968 Holden Belmont.

Compare all specifications:

1973 BMW 525 1968 Holden Belmont
Make BMW Holden
Model 525 Belmont
Year Released 1973 1968
Engine Position Front Front
Engine Size 2494 cc 2130 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 143 HP 76 HP
Engine RPM 6000 RPM 4400 RPM
Torque 208 Nm 163 Nm
Torque RPM 4000 RPM 4400 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 1380 kg 1200 kg
Vehicle Length 4630 mm 4700 mm
Vehicle Width 1700 mm 1830 mm
Vehicle Height 1430 mm 1420 mm
Wheelbase Size 2640 mm 2830 mm