1973 Buick Skylark vs. 1976 Ford Falcon
To start off, 1976 Ford Falcon is newer by 3 year(s). Which means there will be less support and parts availability for 1973 Buick Skylark. In addition, the cost of maintenance, including insurance, on 1973 Buick Skylark would be higher. At 5,763 cc (8 cylinders), 1976 Ford Falcon is equipped with a bigger engine. In terms of performance, 1976 Ford Falcon (256 HP @ 4600 RPM) has 106 more horse power than 1973 Buick Skylark. (150 HP @ 3800 RPM) In normal driving conditions, 1976 Ford Falcon should accelerate faster than 1973 Buick Skylark. With that said, vehicle weight also plays an important factor in acceleration. 1973 Buick Skylark weights approximately 20 kg more than 1976 Ford Falcon.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1976 Ford Falcon (491 Nm @ 2600 RPM) has 125 more torque (in Nm) than 1973 Buick Skylark. (366 Nm @ 2400 RPM). This means 1976 Ford Falcon will have an easier job in driving up hills or pulling heavy equipment than 1973 Buick Skylark.
Compare all specifications:
1973 Buick Skylark | 1976 Ford Falcon | |
Make | Buick | Ford |
Model | Skylark | Falcon |
Year Released | 1973 | 1976 |
Engine Position | Front | Front |
Engine Size | 5724 cc | 5763 cc |
Engine Cylinders | 6 cylinders | 8 cylinders |
Engine Type | V | in-line |
Horse Power | 150 HP | 256 HP |
Engine RPM | 3800 RPM | 4600 RPM |
Torque | 366 Nm | 491 Nm |
Torque RPM | 2400 RPM | 2600 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1605 kg | 1585 kg |
Vehicle Length | 5170 mm | 4870 mm |
Vehicle Width | 1960 mm | 1910 mm |
Vehicle Height | 1390 mm | 1390 mm |
Wheelbase Size | 2960 mm | 2830 mm |