1973 Chevrolet Impala vs. 2009 Mercury Milan
To start off, 2009 Mercury Milan is newer by 36 year(s). Which means there will be less support and parts availability for 1973 Chevrolet Impala. In addition, the cost of maintenance, including insurance, on 1973 Chevrolet Impala would be higher. At 4,097 cc (6 cylinders), 1973 Chevrolet Impala is equipped with a bigger engine. In terms of performance, 2009 Mercury Milan (160 HP @ 6250 RPM) has 50 more horse power than 1973 Chevrolet Impala. (110 HP @ 3800 RPM) In normal driving conditions, 2009 Mercury Milan should accelerate faster than 1973 Chevrolet Impala. With that said, vehicle weight also plays an important factor in acceleration. 2009 Mercury Milan weights approximately 210 kg more than 1973 Chevrolet Impala. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1973 Chevrolet Impala is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1973 Chevrolet Impala. However, in wet, icy, snow, or gravel driving conditions, 2009 Mercury Milan, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1973 Chevrolet Impala (251 Nm @ 1600 RPM) has 39 more torque (in Nm) than 2009 Mercury Milan. (212 Nm @ 4250 RPM). This means 1973 Chevrolet Impala will have an easier job in driving up hills or pulling heavy equipment than 2009 Mercury Milan. 2009 Mercury Milan has automatic transmission and 1973 Chevrolet Impala has manual transmission. 1973 Chevrolet Impala will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Mercury Milan will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1973 Chevrolet Impala | 2009 Mercury Milan | |
| Make | Chevrolet | Mercury |
| Model | Impala | Milan |
| Year Released | 1973 | 2009 |
| Engine Position | Front | Front |
| Engine Size | 4097 cc | 2261 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 110 HP | 160 HP |
| Engine RPM | 3800 RPM | 6250 RPM |
| Torque | 251 Nm | 212 Nm |
| Torque RPM | 1600 RPM | 4250 RPM |
| Engine Bore Size | 98.3 mm | 87.4 mm |
| Engine Stroke Size | 89.6 mm | 94 mm |
| Engine Compression Ratio | 8.5:1 | 12.3:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 5 seats |
| Vehicle Weight | 1715 kg | 1925 kg |
| Vehicle Length | 5600 mm | 4870 mm |
| Vehicle Width | 2030 mm | 1840 mm |
| Vehicle Height | 1370 mm | 1460 mm |
| Wheelbase Size | 3100 mm | 2730 mm |
