1973 Chrysler 160 vs. 2002 Chrysler Sebring

To start off, 2002 Chrysler Sebring is newer by 29 year(s). Which means there will be less support and parts availability for 1973 Chrysler 160. In addition, the cost of maintenance, including insurance, on 1973 Chrysler 160 would be higher. At 2,343 cc (4 cylinders), 2002 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2002 Chrysler Sebring (149 HP @ 5200 RPM) has 41 more horse power than 1973 Chrysler 160. (108 HP @ 5800 RPM) In normal driving conditions, 2002 Chrysler Sebring should accelerate faster than 1973 Chrysler 160. With that said, vehicle weight also plays an important factor in acceleration. 2002 Chrysler Sebring weights approximately 337 kg more than 1973 Chrysler 160. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1973 Chrysler 160 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1973 Chrysler 160. However, in wet, icy, snow, or gravel driving conditions, 2002 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2002 Chrysler Sebring (226 Nm @ 4000 RPM) has 63 more torque (in Nm) than 1973 Chrysler 160. (163 Nm @ 3200 RPM). This means 2002 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1973 Chrysler 160. 2002 Chrysler Sebring has automatic transmission and 1973 Chrysler 160 has manual transmission. 1973 Chrysler 160 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Chrysler Sebring will be easier to drive especially in heavy traffic.

Compare all specifications:

1973 Chrysler 160 2002 Chrysler Sebring
Make Chrysler Chrysler
Model 160 Sebring
Year Released 1973 2002
Engine Position Front Front
Engine Size 1981 cc 2343 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 108 HP 149 HP
Engine RPM 5800 RPM 5200 RPM
Torque 163 Nm 226 Nm
Torque RPM 3200 RPM 4000 RPM
Engine Bore Size 91.7 mm 87.4 mm
Engine Stroke Size 75 mm 101 mm
Engine Compression Ratio 9.5:1 9.4:1
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Vehicle Weight 1115 kg 1452 kg
Vehicle Length 4540 mm 4850 mm
Vehicle Width 1730 mm 1800 mm
Vehicle Height 1440 mm 1400 mm
Wheelbase Size 2680 mm 2880 mm