1973 Chrysler Sedan vs. 1968 Holden Belmont

To start off, 1973 Chrysler Sedan is newer by 5 year(s). Which means there will be less support and parts availability for 1968 Holden Belmont. In addition, the cost of maintenance, including insurance, on 1968 Holden Belmont would be higher. At 4,340 cc (6 cylinders), 1973 Chrysler Sedan is equipped with a bigger engine. In terms of performance, 1973 Chrysler Sedan (200 HP @ 4800 RPM) has 124 more horse power than 1968 Holden Belmont. (76 HP @ 4400 RPM). In normal driving conditions, 1973 Chrysler Sedan should accelerate faster than 1968 Holden Belmont. With that said, vehicle weight also plays an important factor in acceleration. 1973 Chrysler Sedan weights approximately 320 kg more than 1968 Holden Belmont. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1973 Chrysler Sedan (355 Nm @ 2000 RPM) has 192 more torque (in Nm) than 1968 Holden Belmont. (163 Nm @ 4400 RPM). This means 1973 Chrysler Sedan will have an easier job in driving up hills or pulling heavy equipment than 1968 Holden Belmont. 1973 Chrysler Sedan has automatic transmission and 1968 Holden Belmont has manual transmission. 1968 Holden Belmont will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1973 Chrysler Sedan will be easier to drive especially in heavy traffic.

Compare all specifications:

1973 Chrysler Sedan 1968 Holden Belmont
Make Chrysler Holden
Model Sedan Belmont
Year Released 1973 1968
Engine Position Front Front
Engine Size 4340 cc 2130 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 200 HP 76 HP
Engine RPM 4800 RPM 4400 RPM
Torque 355 Nm 163 Nm
Torque RPM 2000 RPM 4400 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Automatic Manual
Vehicle Weight 1520 kg 1200 kg
Vehicle Length 5010 mm 4700 mm
Vehicle Width 1890 mm 1830 mm
Vehicle Height 1440 mm 1420 mm
Wheelbase Size 2930 mm 2830 mm