1973 Datsun Laurel vs. 1966 Ginetta G11
To start off, 1973 Datsun Laurel is newer by 7 year(s). Which means there will be less support and parts availability for 1966 Ginetta G11. In addition, the cost of maintenance, including insurance, on 1966 Ginetta G11 would be higher. At 1,988 cc (4 cylinders), 1973 Datsun Laurel is equipped with a bigger engine. In terms of performance, 1973 Datsun Laurel (124 HP @ 5800 RPM) has 30 more horse power than 1966 Ginetta G11. (94 HP @ 5400 RPM). In normal driving conditions, 1973 Datsun Laurel should accelerate faster than 1966 Ginetta G11. With that said, vehicle weight also plays an important factor in acceleration. 1973 Datsun Laurel weights approximately 899 kg more than 1966 Ginetta G11. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1973 Datsun Laurel | 1966 Ginetta G11 | |
Make | Datsun | Ginetta |
Model | Laurel | G11 |
Year Released | 1973 | 1966 |
Engine Position | Front | Front |
Engine Size | 1988 cc | 1788 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 124 HP | 94 HP |
Engine RPM | 5800 RPM | 5400 RPM |
Engine Bore Size | 89 mm | 80 mm |
Engine Stroke Size | 80 mm | 89 mm |
Engine Compression Ratio | 8.3:1 | 8.8:1 |
Top Speed | 171 km/hour | 177 km/hour |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 4 seats | 2 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1775 kg | 876 kg |
Vehicle Length | 4500 mm | 3990 mm |
Vehicle Width | 1680 mm | 1510 mm |
Wheelbase Size | 2680 mm | 2290 mm |