1973 Fiat 132 vs. 1947 Jeep CJ2A
To start off, 1973 Fiat 132 is newer by 26 year(s). Which means there will be less support and parts availability for 1947 Jeep CJ2A. In addition, the cost of maintenance, including insurance, on 1947 Jeep CJ2A would be higher. At 2,199 cc (4 cylinders), 1947 Jeep CJ2A is equipped with a bigger engine. In terms of performance, 1973 Fiat 132 (111 HP @ 5600 RPM) has 52 more horse power than 1947 Jeep CJ2A. (59 HP @ 3600 RPM). In normal driving conditions, 1973 Fiat 132 should accelerate faster than 1947 Jeep CJ2A. With that said, vehicle weight also plays an important factor in acceleration. 1947 Jeep CJ2A weights approximately 15 kg more than 1973 Fiat 132.
Because 1947 Jeep CJ2A is four wheel drive (4WD), it will have significant more traction and grip than 1973 Fiat 132. In wet, icy, snow, or gravel driving conditions, 1947 Jeep CJ2A will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1973 Fiat 132 (147 Nm @ 3400 RPM) has 2 more torque (in Nm) than 1947 Jeep CJ2A. (145 Nm @ 3600 RPM). This means 1973 Fiat 132 will have an easier job in driving up hills or pulling heavy equipment than 1947 Jeep CJ2A.
Compare all specifications:
1973 Fiat 132 | 1947 Jeep CJ2A | |
Make | Fiat | Jeep |
Model | 132 | CJ2A |
Year Released | 1973 | 1947 |
Engine Position | Front | Front |
Engine Size | 1754 cc | 2199 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 111 HP | 59 HP |
Engine RPM | 5600 RPM | 3600 RPM |
Torque | 147 Nm | 145 Nm |
Torque RPM | 3400 RPM | 3600 RPM |
Drive Type | Rear | 4WD |
Transmission Type | Manual | Manual |
Vehicle Weight | 1095 kg | 1110 kg |
Vehicle Length | 4430 mm | 3130 mm |
Vehicle Width | 1650 mm | 1460 mm |
Vehicle Height | 1430 mm | 1630 mm |
Wheelbase Size | 2560 mm | 2040 mm |