1973 Fiat 132 vs. 2005 Ford Bantam

To start off, 2005 Ford Bantam is newer by 32 year(s). Which means there will be less support and parts availability for 1973 Fiat 132. In addition, the cost of maintenance, including insurance, on 1973 Fiat 132 would be higher. At 1,754 cc (4 cylinders), 1973 Fiat 132 is equipped with a bigger engine. In terms of performance, 1973 Fiat 132 (111 HP @ 5600 RPM) has 52 more horse power than 2005 Ford Bantam. (59 HP @ 4550 RPM). In normal driving conditions, 1973 Fiat 132 should accelerate faster than 2005 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 2005 Ford Bantam weights approximately 23 kg more than 1973 Fiat 132.

Because 1973 Fiat 132 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1973 Fiat 132. However, in wet, icy, snow, or gravel driving conditions, 2005 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1973 Fiat 132 (147 Nm @ 3400 RPM) has 41 more torque (in Nm) than 2005 Ford Bantam. (106 Nm @ 2500 RPM). This means 1973 Fiat 132 will have an easier job in driving up hills or pulling heavy equipment than 2005 Ford Bantam.

Compare all specifications:

1973 Fiat 132 2005 Ford Bantam
Make Fiat Ford
Model 132 Bantam
Year Released 1973 2005
Engine Position Front Front
Engine Size 1754 cc 1753 cc
Horse Power 111 HP 59 HP
Engine RPM 5600 RPM 4550 RPM
Torque 147 Nm 106 Nm
Torque RPM 3400 RPM 2500 RPM
Engine Bore Size 84 mm 82.5 mm
Engine Stroke Size 79.2 mm 82 mm
Engine Compression Ratio 8.9:1 21.5:1
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1095 kg 1118 kg
Wheelbase Size 2560 mm 2730 mm
Fuel Tank Capacity 55 L 54 L