1973 Fiat 132 vs. 2008 Fiat Siena
To start off, 2008 Fiat Siena is newer by 35 year(s). Which means there will be less support and parts availability for 1973 Fiat 132. In addition, the cost of maintenance, including insurance, on 1973 Fiat 132 would be higher. At 1,755 cc (4 cylinders), 1973 Fiat 132 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1973 Fiat 132 weights approximately 20 kg more than 2008 Fiat Siena.
Because 1973 Fiat 132 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1973 Fiat 132. However, in wet, icy, snow, or gravel driving conditions, 2008 Fiat Siena, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1973 Fiat 132 (144 Nm @ 4200 RPM) has 42 more torque (in Nm) than 2008 Fiat Siena. (102 Nm @ 3250 RPM). This means 1973 Fiat 132 will have an easier job in driving up hills or pulling heavy equipment than 2008 Fiat Siena.
Compare all specifications:
1973 Fiat 132 | 2008 Fiat Siena | |
Make | Fiat | Fiat |
Model | 132 | Siena |
Year Released | 1973 | 2008 |
Engine Position | Front | Front |
Engine Size | 1755 cc | 1242 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 104 HP | 0 HP |
Torque | 144 Nm | 102 Nm |
Torque RPM | 4200 RPM | 3250 RPM |
Engine Compression Ratio | 9.0:1 | 9.1:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1090 kg | 1070 kg |
Vehicle Length | 4390 mm | 3830 mm |
Vehicle Width | 1650 mm | 1640 mm |
Vehicle Height | 1390 mm | 1440 mm |
Wheelbase Size | 2560 mm | 2380 mm |
Fuel Tank Capacity | 50 L | 54 L |