1973 Fiat 500 vs. 2008 Mazda 3

To start off, 2008 Mazda 3 is newer by 35 year(s). Which means there will be less support and parts availability for 1973 Fiat 500. In addition, the cost of maintenance, including insurance, on 1973 Fiat 500 would be higher. At 1,597 cc (4 cylinders), 2008 Mazda 3 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mazda 3 weights approximately 670 kg more than 1973 Fiat 500.

Because 1973 Fiat 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1973 Fiat 500. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mazda 3 (146 Nm @ 4000 RPM) has 119 more torque (in Nm) than 1973 Fiat 500. (27 Nm @ 3200 RPM). This means 2008 Mazda 3 will have an easier job in driving up hills or pulling heavy equipment than 1973 Fiat 500.

Compare all specifications:

1973 Fiat 500 2008 Mazda 3
Make Fiat Mazda
Model 500 3
Year Released 1973 2008
Body Type Coupe Sedan
Engine Position Rear Front
Engine Size 499 cc 1597 cc
Engine Cylinders 2 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 18 HP 0 HP
Torque 27 Nm 146 Nm
Torque RPM 3200 RPM 4000 RPM
Engine Bore Size 67.4 mm 78 mm
Engine Stroke Size 70 mm 83.6 mm
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 510 kg 1180 kg
Vehicle Length 2980 mm 4500 mm
Vehicle Width 1330 mm 1760 mm
Vehicle Height 1330 mm 1470 mm
Wheelbase Size 1850 mm 2650 mm
Fuel Tank Capacity 22 L 55 L