1973 Subaru Leone vs. 1980 Subaru DL
To start off, 1980 Subaru DL is newer by 7 year(s). Which means there will be less support and parts availability for 1973 Subaru Leone. In addition, the cost of maintenance, including insurance, on 1973 Subaru Leone would be higher. At 1,361 cc (4 cylinders), 1973 Subaru Leone is equipped with a bigger engine. In terms of performance, 1980 Subaru DL (67 HP) has 7 more horse power than 1973 Subaru Leone. (60 HP) In normal driving conditions, 1980 Subaru DL should accelerate faster than 1973 Subaru Leone. With that said, vehicle weight also plays an important factor in acceleration. 1980 Subaru DL weights approximately 25 kg more than 1973 Subaru Leone. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Subaru DL (100 Nm @ 3200 RPM) has 5 more torque (in Nm) than 1973 Subaru Leone. (95 Nm @ 3600 RPM). This means 1980 Subaru DL will have an easier job in driving up hills or pulling heavy equipment than 1973 Subaru Leone.
Compare all specifications:
1973 Subaru Leone | 1980 Subaru DL | |
Make | Subaru | Subaru |
Model | Leone | DL |
Year Released | 1973 | 1980 |
Engine Position | Front | Front |
Engine Size | 1361 cc | 1296 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 60 HP | 67 HP |
Torque | 95 Nm | 100 Nm |
Torque RPM | 3600 RPM | 3200 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 4 seats | 4 seats |
Vehicle Weight | 795 kg | 820 kg |
Vehicle Length | 4000 mm | 4160 mm |
Vehicle Width | 1510 mm | 1620 mm |
Vehicle Height | 1350 mm | 1370 mm |
Wheelbase Size | 2450 mm | 2470 mm |