1974 Alpine A 310 vs. 1971 Holden Belmont

To start off, 1974 Alpine A 310 is newer by 3 year(s). Which means there will be less support and parts availability for 1971 Holden Belmont. In addition, the cost of maintenance, including insurance, on 1971 Holden Belmont would be higher. At 3,298 cc (6 cylinders), 1971 Holden Belmont is equipped with a bigger engine. In terms of performance, 1971 Holden Belmont (133 HP @ 4400 RPM) has 6 more horse power than 1974 Alpine A 310. (127 HP @ 6250 RPM) In normal driving conditions, 1971 Holden Belmont should accelerate faster than 1974 Alpine A 310. With that said, vehicle weight also plays an important factor in acceleration. 1971 Holden Belmont weights approximately 515 kg more than 1974 Alpine A 310. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1971 Holden Belmont (263 Nm @ 2000 RPM) has 117 more torque (in Nm) than 1974 Alpine A 310. (146 Nm @ 5000 RPM). This means 1971 Holden Belmont will have an easier job in driving up hills or pulling heavy equipment than 1974 Alpine A 310.

Compare all specifications:

1974 Alpine A 310 1971 Holden Belmont
Make Alpine Holden
Model A 310 Belmont
Year Released 1974 1971
Engine Position Rear Front
Engine Size 1605 cc 3298 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 127 HP 133 HP
Engine RPM 6250 RPM 4400 RPM
Torque 146 Nm 263 Nm
Torque RPM 5000 RPM 2000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 825 kg 1340 kg
Vehicle Length 4190 mm 4770 mm
Vehicle Width 1630 mm 1890 mm
Vehicle Height 1160 mm 1380 mm
Wheelbase Size 2280 mm 2830 mm