1974 BMW 3 vs. 1958 Toyota Crown

To start off, 1974 BMW 3 is newer by 16 year(s). Which means there will be less support and parts availability for 1958 Toyota Crown. In addition, the cost of maintenance, including insurance, on 1958 Toyota Crown would be higher. At 2,986 cc (6 cylinders), 1974 BMW 3 is equipped with a bigger engine. In terms of performance, 1974 BMW 3 (200 HP @ 5500 RPM) has 151 more horse power than 1958 Toyota Crown. (49 HP @ 4400 RPM). In normal driving conditions, 1974 BMW 3 should accelerate faster than 1958 Toyota Crown. With that said, vehicle weight also plays an important factor in acceleration. 1974 BMW 3 weights approximately 183 kg more than 1958 Toyota Crown. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1974 BMW 3 (270 Nm @ 4300 RPM) has 162 more torque (in Nm) than 1958 Toyota Crown. (108 Nm @ 2800 RPM). This means 1974 BMW 3 will have an easier job in driving up hills or pulling heavy equipment than 1958 Toyota Crown.

Compare all specifications:

1974 BMW 3 1958 Toyota Crown
Make BMW Toyota
Model 3 Crown
Year Released 1974 1958
Engine Position Front Front
Engine Size 2986 cc 1453 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 200 HP 49 HP
Engine RPM 5500 RPM 4400 RPM
Torque 270 Nm 108 Nm
Torque RPM 4300 RPM 2800 RPM
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1433 kg 1250 kg
Vehicle Length 4720 mm 4370 mm
Vehicle Width 1760 mm 1700 mm
Vehicle Height 1460 mm 1550 mm
Wheelbase Size 2700 mm 2540 mm