1974 Fiat 133 vs. 1966 NSU Wankel Spider
To start off, 1974 Fiat 133 is newer by 8 year(s). Which means there will be less support and parts availability for 1966 NSU Wankel Spider. In addition, the cost of maintenance, including insurance, on 1966 NSU Wankel Spider would be higher. At 842 cc (4 cylinders), 1974 Fiat 133 is equipped with a bigger engine. In terms of performance, 1966 NSU Wankel Spider (49 HP @ 5500 RPM) has 15 more horse power than 1974 Fiat 133. (34 HP @ 4800 RPM) In normal driving conditions, 1966 NSU Wankel Spider should accelerate faster than 1974 Fiat 133. With that said, vehicle weight also plays an important factor in acceleration. 1966 NSU Wankel Spider weights approximately 45 kg more than 1974 Fiat 133. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1966 NSU Wankel Spider (74 Nm @ 3000 RPM) has 20 more torque (in Nm) than 1974 Fiat 133. (54 Nm @ 3200 RPM). This means 1966 NSU Wankel Spider will have an easier job in driving up hills or pulling heavy equipment than 1974 Fiat 133.
Compare all specifications:
1974 Fiat 133 | 1966 NSU Wankel Spider | |
Make | Fiat | NSU |
Model | 133 | Wankel Spider |
Year Released | 1974 | 1966 |
Engine Position | Rear | Rear |
Engine Size | 842 cc | 497 cc |
Horse Power | 34 HP | 49 HP |
Engine RPM | 4800 RPM | 5500 RPM |
Torque | 54 Nm | 74 Nm |
Torque RPM | 3200 RPM | 3000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Vehicle Weight | 690 kg | 735 kg |
Vehicle Length | 3460 mm | 3590 mm |
Vehicle Width | 1430 mm | 1530 mm |
Vehicle Height | 1330 mm | 1270 mm |
Wheelbase Size | 2030 mm | 2020 mm |