1974 Fiat 133 vs. 1978 Mazda 929

To start off, 1978 Mazda 929 is newer by 4 year(s). Which means there will be less support and parts availability for 1974 Fiat 133. In addition, the cost of maintenance, including insurance, on 1974 Fiat 133 would be higher. At 1,970 cc (4 cylinders), 1978 Mazda 929 is equipped with a bigger engine. In terms of performance, 1978 Mazda 929 (90 HP @ 4800 RPM) has 56 more horse power than 1974 Fiat 133. (34 HP @ 4800 RPM) In normal driving conditions, 1978 Mazda 929 should accelerate faster than 1974 Fiat 133. With that said, vehicle weight also plays an important factor in acceleration. 1978 Mazda 929 weights approximately 460 kg more than 1974 Fiat 133. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1978 Mazda 929 (160 Nm @ 2500 RPM) has 106 more torque (in Nm) than 1974 Fiat 133. (54 Nm @ 3200 RPM). This means 1978 Mazda 929 will have an easier job in driving up hills or pulling heavy equipment than 1974 Fiat 133.

Compare all specifications:

1974 Fiat 133 1978 Mazda 929
Make Fiat Mazda
Model 133 929
Year Released 1974 1978
Engine Position Rear Front
Engine Size 842 cc 1970 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 34 HP 90 HP
Engine RPM 4800 RPM 4800 RPM
Torque 54 Nm 160 Nm
Torque RPM 3200 RPM 2500 RPM
Engine Bore Size 65 mm 80.1 mm
Engine Stroke Size 68 mm 98 mm
Engine Compression Ratio 7.9:1 8.6:1
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 690 kg 1150 kg
Vehicle Length 3460 mm 4640 mm
Vehicle Width 1430 mm 1720 mm
Vehicle Height 1330 mm 1450 mm
Wheelbase Size 2030 mm 2620 mm