1974 Lancia 2000 vs. 2008 Peugeot 307
To start off, 2008 Peugeot 307 is newer by 34 year(s). Which means there will be less support and parts availability for 1974 Lancia 2000. In addition, the cost of maintenance, including insurance, on 1974 Lancia 2000 would be higher. At 1,997 cc, 2008 Peugeot 307 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Peugeot 307 weights approximately 88 kg more than 1974 Lancia 2000.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Peugeot 307 (190 Nm @ 4100 RPM) has 20 more torque (in Nm) than 1974 Lancia 2000. (170 Nm @ 3500 RPM). This means 2008 Peugeot 307 will have an easier job in driving up hills or pulling heavy equipment than 1974 Lancia 2000. 2008 Peugeot 307 has automatic transmission and 1974 Lancia 2000 has manual transmission. 1974 Lancia 2000 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Peugeot 307 will be easier to drive especially in heavy traffic.
Compare all specifications:
1974 Lancia 2000 | 2008 Peugeot 307 | |
Make | Lancia | Peugeot |
Model | 2000 | 307 |
Year Released | 1974 | 2008 |
Engine Position | Front | Front |
Engine Size | 1995 cc | 1997 cc |
Horse Power | 114 HP | 0 HP |
Torque | 170 Nm | 190 Nm |
Torque RPM | 3500 RPM | 4100 RPM |
Engine Bore Size | 84 mm | 85 mm |
Engine Stroke Size | 90 mm | 88 mm |
Engine Compression Ratio | 8.9:1 | 10.8:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 4 seats |
Vehicle Weight | 1190 kg | 1278 kg |
Vehicle Length | 4550 mm | 4210 mm |
Vehicle Width | 1620 mm | 1740 mm |
Vehicle Height | 1340 mm | 1520 mm |
Wheelbase Size | 2490 mm | 2610 mm |