1974 Mazda 929 vs. 2000 Tata E
To start off, 2000 Tata E is newer by 26 year(s). Which means there will be less support and parts availability for 1974 Mazda 929. In addition, the cost of maintenance, including insurance, on 1974 Mazda 929 would be higher. At 2,198 cc (4 cylinders), 2000 Tata E is equipped with a bigger engine. In terms of performance, 2000 Tata E (148 HP @ 5500 RPM) has 65 more horse power than 1974 Mazda 929. (83 HP @ 5000 RPM) In normal driving conditions, 2000 Tata E should accelerate faster than 1974 Mazda 929. With that said, vehicle weight also plays an important factor in acceleration. 2000 Tata E weights approximately 220 kg more than 1974 Mazda 929. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Tata E (210 Nm @ 4000 RPM) has 75 more torque (in Nm) than 1974 Mazda 929. (135 Nm @ 3000 RPM). This means 2000 Tata E will have an easier job in driving up hills or pulling heavy equipment than 1974 Mazda 929.
Compare all specifications:
1974 Mazda 929 | 2000 Tata E | |
Make | Mazda | Tata |
Model | 929 | E |
Year Released | 1974 | 2000 |
Engine Size | 1769 cc | 2198 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 83 HP | 148 HP |
Engine RPM | 5000 RPM | 5500 RPM |
Torque | 135 Nm | 210 Nm |
Torque RPM | 3000 RPM | 4000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1150 kg | 1370 kg |
Vehicle Length | 4410 mm | 4750 mm |
Vehicle Width | 1670 mm | 1750 mm |
Vehicle Height | 1420 mm | 1440 mm |
Wheelbase Size | 2520 mm | 2810 mm |