1975 Alpine A 310 vs. 1998 Chrysler Concorde
To start off, 1998 Chrysler Concorde is newer by 23 year(s). Which means there will be less support and parts availability for 1975 Alpine A 310. In addition, the cost of maintenance, including insurance, on 1975 Alpine A 310 would be higher. At 2,734 cc (6 cylinders), 1998 Chrysler Concorde is equipped with a bigger engine. In terms of performance, 1998 Chrysler Concorde (190 HP @ 5800 RPM) has 63 more horse power than 1975 Alpine A 310. (127 HP @ 6250 RPM) In normal driving conditions, 1998 Chrysler Concorde should accelerate faster than 1975 Alpine A 310. With that said, vehicle weight also plays an important factor in acceleration. 1998 Chrysler Concorde weights approximately 750 kg more than 1975 Alpine A 310. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1975 Alpine A 310 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1975 Alpine A 310. However, in wet, icy, snow, or gravel driving conditions, 1998 Chrysler Concorde, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1998 Chrysler Concorde (255 Nm @ 4850 RPM) has 109 more torque (in Nm) than 1975 Alpine A 310. (146 Nm @ 5000 RPM). This means 1998 Chrysler Concorde will have an easier job in driving up hills or pulling heavy equipment than 1975 Alpine A 310. 1998 Chrysler Concorde has automatic transmission and 1975 Alpine A 310 has manual transmission. 1975 Alpine A 310 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1998 Chrysler Concorde will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1975 Alpine A 310 | 1998 Chrysler Concorde | |
| Make | Alpine | Chrysler |
| Model | A 310 | Concorde |
| Year Released | 1975 | 1998 |
| Body Type | Coupe | Sedan |
| Engine Position | Rear | Front |
| Engine Size | 1604 cc | 2734 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Horse Power | 127 HP | 190 HP |
| Engine RPM | 6250 RPM | 5800 RPM |
| Torque | 146 Nm | 255 Nm |
| Torque RPM | 5000 RPM | 4850 RPM |
| Engine Bore Size | 78 mm | 86 mm |
| Engine Stroke Size | 84 mm | 78.5 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 825 kg | 1575 kg |
| Vehicle Length | 4190 mm | 5280 mm |
| Vehicle Width | 1630 mm | 1900 mm |
| Vehicle Height | 1160 mm | 1420 mm |
| Wheelbase Size | 2280 mm | 2880 mm |
| Fuel Tank Capacity | 60 L | 68 L |
