1975 Audi 80 vs. 2008 Ford Crown Victoria
To start off, 2008 Ford Crown Victoria is newer by 33 year(s). Which means there will be less support and parts availability for 1975 Audi 80. In addition, the cost of maintenance, including insurance, on 1975 Audi 80 would be higher. At 4,601 cc (8 cylinders), 2008 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2008 Ford Crown Victoria (225 HP @ 4800 RPM) has 150 more horse power than 1975 Audi 80. (75 HP @ 5500 RPM) In normal driving conditions, 2008 Ford Crown Victoria should accelerate faster than 1975 Audi 80. With that said, vehicle weight also plays an important factor in acceleration. 2008 Ford Crown Victoria weights approximately 928 kg more than 1975 Audi 80. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2008 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 1975 Audi 80, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Ford Crown Victoria (369 Nm @ 4000 RPM) has 257 more torque (in Nm) than 1975 Audi 80. (112 Nm @ 3200 RPM). This means 2008 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 1975 Audi 80. 2008 Ford Crown Victoria has automatic transmission and 1975 Audi 80 has manual transmission. 1975 Audi 80 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
1975 Audi 80 | 2008 Ford Crown Victoria | |
Make | Audi | Ford |
Model | 80 | Crown Victoria |
Year Released | 1975 | 2008 |
Engine Position | Front | Front |
Engine Size | 1588 cc | 4601 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Horse Power | 75 HP | 225 HP |
Engine RPM | 5500 RPM | 4800 RPM |
Torque | 112 Nm | 369 Nm |
Torque RPM | 3200 RPM | 4000 RPM |
Engine Bore Size | 79.5 mm | 90.2 mm |
Engine Stroke Size | 80 mm | 89.9 mm |
Engine Compression Ratio | 8.2:1 | 9.4:1 |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 912 kg | 1840 kg |
Vehicle Length | 4390 mm | 5390 mm |
Vehicle Width | 1690 mm | 2000 mm |
Vehicle Height | 1370 mm | 1490 mm |
Wheelbase Size | 2550 mm | 2920 mm |
Fuel Tank Capacity | 60 L | 72 L |