1975 Austin Allegro vs. 1953 Chevrolet Bel Air
To start off, 1975 Austin Allegro is newer by 22 year(s). Which means there will be less support and parts availability for 1953 Chevrolet Bel Air. In addition, the cost of maintenance, including insurance, on 1953 Chevrolet Bel Air would be higher. At 3,859 cc (6 cylinders), 1953 Chevrolet Bel Air is equipped with a bigger engine. In terms of performance, 1953 Chevrolet Bel Air (115 HP @ 3700 RPM) has 71 more horse power than 1975 Austin Allegro. (44 HP @ 5250 RPM) In normal driving conditions, 1953 Chevrolet Bel Air should accelerate faster than 1975 Austin Allegro. With that said, vehicle weight also plays an important factor in acceleration. 1953 Chevrolet Bel Air weights approximately 668 kg more than 1975 Austin Allegro. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1953 Chevrolet Bel Air is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1953 Chevrolet Bel Air. However, in wet, icy, snow, or gravel driving conditions, 1975 Austin Allegro, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1953 Chevrolet Bel Air (271 Nm @ 2000 RPM) has 197 more torque (in Nm) than 1975 Austin Allegro. (74 Nm @ 2900 RPM). This means 1953 Chevrolet Bel Air will have an easier job in driving up hills or pulling heavy equipment than 1975 Austin Allegro. 1953 Chevrolet Bel Air has automatic transmission and 1975 Austin Allegro has manual transmission. 1975 Austin Allegro will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1953 Chevrolet Bel Air will be easier to drive especially in heavy traffic.
Compare all specifications:
1975 Austin Allegro | 1953 Chevrolet Bel Air | |
Make | Austin | Chevrolet |
Model | Allegro | Bel Air |
Year Released | 1975 | 1953 |
Engine Position | Front | Front |
Engine Size | 1098 cc | 3859 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 44 HP | 115 HP |
Engine RPM | 5250 RPM | 3700 RPM |
Torque | 74 Nm | 271 Nm |
Torque RPM | 2900 RPM | 2000 RPM |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 815 kg | 1483 kg |
Vehicle Length | 3200 mm | 4980 mm |
Vehicle Width | 1620 mm | 1910 mm |
Vehicle Height | 1400 mm | 1650 mm |
Wheelbase Size | 2450 mm | 2930 mm |
Fuel Tank Capacity | 48 L | 60 L |