1975 BMW 320 vs. 2008 Chrysler Sebring

To start off, 2008 Chrysler Sebring is newer by 33 year(s). Which means there will be less support and parts availability for 1975 BMW 320. In addition, the cost of maintenance, including insurance, on 1975 BMW 320 would be higher. At 1,990 cc (4 cylinders), 1975 BMW 320 is equipped with a bigger engine. In terms of performance, 2008 Chrysler Sebring (138 HP @ 4000 RPM) has 29 more horse power than 1975 BMW 320. (109 HP @ 5800 RPM) In normal driving conditions, 2008 Chrysler Sebring should accelerate faster than 1975 BMW 320. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Sebring weights approximately 730 kg more than 1975 BMW 320. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1975 BMW 320 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1975 BMW 320. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Sebring (311 Nm @ 1800 RPM) has 154 more torque (in Nm) than 1975 BMW 320. (157 Nm @ 3700 RPM). This means 2008 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1975 BMW 320. 2008 Chrysler Sebring has automatic transmission and 1975 BMW 320 has manual transmission. 1975 BMW 320 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Sebring will be easier to drive especially in heavy traffic.

Compare all specifications:

1975 BMW 320 2008 Chrysler Sebring
Make BMW Chrysler
Model 320 Sebring
Year Released 1975 2008
Body Type Sedan Convertible
Engine Position Front Front
Engine Size 1990 cc 1968 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 109 HP 138 HP
Engine RPM 5800 RPM 4000 RPM
Torque 157 Nm 311 Nm
Torque RPM 3700 RPM 1800 RPM
Engine Bore Size 89 mm 81 mm
Engine Stroke Size 80 mm 95.5 mm
Fuel Type Gasoline Diesel
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 4 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1120 kg 1850 kg
Vehicle Length 4360 mm 4940 mm
Vehicle Width 1620 mm 1850 mm
Vehicle Height 1350 mm 1490 mm
Wheelbase Size 2580 mm 2770 mm
Fuel Tank Capacity 52 L 64 L