1975 Chrysler Centura vs. 1954 Riley Pathfinder

To start off, 1975 Chrysler Centura is newer by 21 year(s). Which means there will be less support and parts availability for 1954 Riley Pathfinder. In addition, the cost of maintenance, including insurance, on 1954 Riley Pathfinder would be higher. At 2,443 cc (4 cylinders), 1954 Riley Pathfinder is equipped with a bigger engine. In terms of performance, 1975 Chrysler Centura (118 HP @ 5700 RPM) has 10 more horse power than 1954 Riley Pathfinder. (108 HP @ 4500 RPM). In normal driving conditions, 1975 Chrysler Centura should accelerate faster than 1954 Riley Pathfinder. With that said, vehicle weight also plays an important factor in acceleration. 1954 Riley Pathfinder weights approximately 420 kg more than 1975 Chrysler Centura.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1954 Riley Pathfinder (182 Nm @ 3000 RPM) has 6 more torque (in Nm) than 1975 Chrysler Centura. (176 Nm @ 3500 RPM). This means 1954 Riley Pathfinder will have an easier job in driving up hills or pulling heavy equipment than 1975 Chrysler Centura.

Compare all specifications:

1975 Chrysler Centura 1954 Riley Pathfinder
Make Chrysler Riley
Model Centura Pathfinder
Year Released 1975 1954
Engine Position Front Front
Engine Size 1981 cc 2443 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 118 HP 108 HP
Engine RPM 5700 RPM 4500 RPM
Torque 176 Nm 182 Nm
Torque RPM 3500 RPM 3000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Vehicle Weight 1115 kg 1535 kg
Vehicle Length 4590 mm 4650 mm
Vehicle Width 1740 mm 1710 mm
Vehicle Height 1440 mm 1530 mm
Wheelbase Size 2680 mm 2860 mm