1975 Chrysler Centura vs. 1983 Holden Camira
To start off, 1983 Holden Camira is newer by 8 year(s). Which means there will be less support and parts availability for 1975 Chrysler Centura. In addition, the cost of maintenance, including insurance, on 1975 Chrysler Centura would be higher. At 1,981 cc (4 cylinders), 1975 Chrysler Centura is equipped with a bigger engine. In terms of performance, 1975 Chrysler Centura (118 HP @ 5700 RPM) has 32 more horse power than 1983 Holden Camira. (86 HP @ 5800 RPM). In normal driving conditions, 1975 Chrysler Centura should accelerate faster than 1983 Holden Camira. With that said, vehicle weight also plays an important factor in acceleration. 1975 Chrysler Centura weights approximately 75 kg more than 1983 Holden Camira. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1975 Chrysler Centura is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1975 Chrysler Centura. However, in wet, icy, snow, or gravel driving conditions, 1983 Holden Camira, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1975 Chrysler Centura (176 Nm @ 3500 RPM) has 51 more torque (in Nm) than 1983 Holden Camira. (125 Nm @ 3800 RPM). This means 1975 Chrysler Centura will have an easier job in driving up hills or pulling heavy equipment than 1983 Holden Camira. 1983 Holden Camira has automatic transmission and 1975 Chrysler Centura has manual transmission. 1975 Chrysler Centura will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1983 Holden Camira will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1975 Chrysler Centura | 1983 Holden Camira | |
| Make | Chrysler | Holden |
| Model | Centura | Camira |
| Year Released | 1975 | 1983 |
| Engine Position | Front | Front |
| Engine Size | 1981 cc | 1598 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 118 HP | 86 HP |
| Engine RPM | 5700 RPM | 5800 RPM |
| Torque | 176 Nm | 125 Nm |
| Torque RPM | 3500 RPM | 3800 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Vehicle Weight | 1115 kg | 1040 kg |
| Vehicle Length | 4590 mm | 4410 mm |
| Vehicle Width | 1740 mm | 1690 mm |
| Vehicle Height | 1440 mm | 1370 mm |
| Wheelbase Size | 2680 mm | 2580 mm |
