1975 Chrysler Sedan vs. 1963 Isuzu Bellett
To start off, 1975 Chrysler Sedan is newer by 12 year(s). Which means there will be less support and parts availability for 1963 Isuzu Bellett. In addition, the cost of maintenance, including insurance, on 1963 Isuzu Bellett would be higher. At 4,342 cc (6 cylinders), 1975 Chrysler Sedan is equipped with a bigger engine. In terms of performance, 1975 Chrysler Sedan (200 HP @ 4800 RPM) has 85 more horse power than 1963 Isuzu Bellett. (115 HP @ 5800 RPM). In normal driving conditions, 1975 Chrysler Sedan should accelerate faster than 1963 Isuzu Bellett. With that said, vehicle weight also plays an important factor in acceleration. 1975 Chrysler Sedan weights approximately 600 kg more than 1963 Isuzu Bellett. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1975 Chrysler Sedan (355 Nm @ 2000 RPM) has 203 more torque (in Nm) than 1963 Isuzu Bellett. (152 Nm @ 4200 RPM). This means 1975 Chrysler Sedan will have an easier job in driving up hills or pulling heavy equipment than 1963 Isuzu Bellett. 1975 Chrysler Sedan has automatic transmission and 1963 Isuzu Bellett has manual transmission. 1963 Isuzu Bellett will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1975 Chrysler Sedan will be easier to drive especially in heavy traffic.
Compare all specifications:
1975 Chrysler Sedan | 1963 Isuzu Bellett | |
Make | Chrysler | Isuzu |
Model | Sedan | Bellett |
Year Released | 1975 | 1963 |
Engine Position | Front | Front |
Engine Size | 4342 cc | 1816 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 200 HP | 115 HP |
Engine RPM | 4800 RPM | 5800 RPM |
Torque | 355 Nm | 152 Nm |
Torque RPM | 2000 RPM | 4200 RPM |
Drive Type | Rear | Rear |
Transmission Type | Automatic | Manual |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1530 kg | 930 kg |
Vehicle Length | 5000 mm | 4020 mm |
Vehicle Width | 1890 mm | 1500 mm |
Vehicle Height | 1420 mm | 1390 mm |
Wheelbase Size | 2930 mm | 2360 mm |