1975 Chrysler Sedan vs. 1963 Lancia Flavia
To start off, 1975 Chrysler Sedan is newer by 12 year(s). Which means there will be less support and parts availability for 1963 Lancia Flavia. In addition, the cost of maintenance, including insurance, on 1963 Lancia Flavia would be higher. At 4,342 cc (6 cylinders), 1975 Chrysler Sedan is equipped with a bigger engine. In terms of performance, 1975 Chrysler Sedan (200 HP @ 4800 RPM) has 108 more horse power than 1963 Lancia Flavia. (92 HP @ 5200 RPM). In normal driving conditions, 1975 Chrysler Sedan should accelerate faster than 1963 Lancia Flavia. With that said, vehicle weight also plays an important factor in acceleration. 1975 Chrysler Sedan weights approximately 332 kg more than 1963 Lancia Flavia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1975 Chrysler Sedan is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1975 Chrysler Sedan. However, in wet, icy, snow, or gravel driving conditions, 1963 Lancia Flavia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1975 Chrysler Sedan (355 Nm @ 2000 RPM) has 211 more torque (in Nm) than 1963 Lancia Flavia. (144 Nm @ 3000 RPM). This means 1975 Chrysler Sedan will have an easier job in driving up hills or pulling heavy equipment than 1963 Lancia Flavia. 1975 Chrysler Sedan has automatic transmission and 1963 Lancia Flavia has manual transmission. 1963 Lancia Flavia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1975 Chrysler Sedan will be easier to drive especially in heavy traffic.
Compare all specifications:
1975 Chrysler Sedan | 1963 Lancia Flavia | |
Make | Chrysler | Lancia |
Model | Sedan | Flavia |
Year Released | 1975 | 1963 |
Engine Position | Front | Front |
Engine Size | 4342 cc | 1800 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | boxer |
Horse Power | 200 HP | 92 HP |
Engine RPM | 4800 RPM | 5200 RPM |
Torque | 355 Nm | 144 Nm |
Torque RPM | 2000 RPM | 3000 RPM |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1520 kg | 1188 kg |
Vehicle Length | 5010 mm | 4590 mm |
Vehicle Width | 1890 mm | 1620 mm |
Vehicle Height | 1440 mm | 1520 mm |
Wheelbase Size | 2930 mm | 2660 mm |