1975 Chrysler Sedan vs. 1973 Mercedes-Benz 280
To start off, 1975 Chrysler Sedan is newer by 2 year(s). Which means there will be less support and parts availability for 1973 Mercedes-Benz 280. In addition, the cost of maintenance, including insurance, on 1973 Mercedes-Benz 280 would be higher. At 4,342 cc (6 cylinders), 1975 Chrysler Sedan is equipped with a bigger engine. In terms of performance, 1975 Chrysler Sedan (200 HP @ 4800 RPM) has 30 more horse power than 1973 Mercedes-Benz 280. (170 HP @ 5750 RPM). In normal driving conditions, 1975 Chrysler Sedan should accelerate faster than 1973 Mercedes-Benz 280. With that said, vehicle weight also plays an important factor in acceleration. 1975 Chrysler Sedan weights approximately 225 kg more than 1973 Mercedes-Benz 280. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1975 Chrysler Sedan (355 Nm @ 2000 RPM) has 115 more torque (in Nm) than 1973 Mercedes-Benz 280. (240 Nm @ 4500 RPM). This means 1975 Chrysler Sedan will have an easier job in driving up hills or pulling heavy equipment than 1973 Mercedes-Benz 280. 1975 Chrysler Sedan has automatic transmission and 1973 Mercedes-Benz 280 has manual transmission. 1973 Mercedes-Benz 280 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1975 Chrysler Sedan will be easier to drive especially in heavy traffic.
Compare all specifications:
1975 Chrysler Sedan | 1973 Mercedes-Benz 280 | |
Make | Chrysler | Mercedes-Benz |
Model | Sedan | 280 |
Year Released | 1975 | 1973 |
Engine Position | Front | Front |
Engine Size | 4342 cc | 2778 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 200 HP | 170 HP |
Engine RPM | 4800 RPM | 5750 RPM |
Torque | 355 Nm | 240 Nm |
Torque RPM | 2000 RPM | 4500 RPM |
Drive Type | Rear | Rear |
Transmission Type | Automatic | Manual |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1520 kg | 1295 kg |
Vehicle Length | 5010 mm | 4310 mm |
Vehicle Width | 1890 mm | 1770 mm |
Vehicle Height | 1440 mm | 1320 mm |
Wheelbase Size | 2930 mm | 2410 mm |