1975 Chrysler Sedan vs. 2003 Mazda MPV

To start off, 2003 Mazda MPV is newer by 28 year(s). Which means there will be less support and parts availability for 1975 Chrysler Sedan. In addition, the cost of maintenance, including insurance, on 1975 Chrysler Sedan would be higher. At 4,342 cc (6 cylinders), 1975 Chrysler Sedan is equipped with a bigger engine. In terms of performance, 1975 Chrysler Sedan (200 HP @ 4800 RPM) has 61 more horse power than 2003 Mazda MPV. (139 HP @ 6000 RPM). In normal driving conditions, 1975 Chrysler Sedan should accelerate faster than 2003 Mazda MPV. With that said, vehicle weight also plays an important factor in acceleration. 2003 Mazda MPV weights approximately 110 kg more than 1975 Chrysler Sedan.

Because 1975 Chrysler Sedan is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1975 Chrysler Sedan. However, in wet, icy, snow, or gravel driving conditions, 2003 Mazda MPV, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1975 Chrysler Sedan (355 Nm @ 2000 RPM) has 148 more torque (in Nm) than 2003 Mazda MPV. (207 Nm @ 4000 RPM). This means 1975 Chrysler Sedan will have an easier job in driving up hills or pulling heavy equipment than 2003 Mazda MPV. 1975 Chrysler Sedan has automatic transmission and 2003 Mazda MPV has manual transmission. 2003 Mazda MPV will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1975 Chrysler Sedan will be easier to drive especially in heavy traffic.

Compare all specifications:

1975 Chrysler Sedan 2003 Mazda MPV
Make Chrysler Mazda
Model Sedan MPV
Year Released 1975 2003
Body Type Sedan Minivan
Engine Position Front Front
Engine Size 4342 cc 2260 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 200 HP 139 HP
Engine RPM 4800 RPM 6000 RPM
Torque 355 Nm 207 Nm
Torque RPM 2000 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Doors 4 doors 5 doors
Vehicle Weight 1530 kg 1640 kg
Vehicle Length 5000 mm 4780 mm
Vehicle Width 1890 mm 1840 mm
Vehicle Height 1420 mm 1790 mm
Wheelbase Size 2930 mm 2680 mm