1975 Chrysler Sedan vs. 2005 Marcos TS

To start off, 2005 Marcos TS is newer by 30 year(s). Which means there will be less support and parts availability for 1975 Chrysler Sedan. In addition, the cost of maintenance, including insurance, on 1975 Chrysler Sedan would be higher. At 4,342 cc (6 cylinders), 1975 Chrysler Sedan is equipped with a bigger engine. In terms of performance, 1975 Chrysler Sedan (200 HP @ 4800 RPM) has 22 more horse power than 2005 Marcos TS. (178 HP @ 6000 RPM). In normal driving conditions, 1975 Chrysler Sedan should accelerate faster than 2005 Marcos TS. With that said, vehicle weight also plays an important factor in acceleration. 1975 Chrysler Sedan weights approximately 445 kg more than 2005 Marcos TS. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1975 Chrysler Sedan (355 Nm @ 2000 RPM) has 131 more torque (in Nm) than 2005 Marcos TS. (224 Nm @ 4250 RPM). This means 1975 Chrysler Sedan will have an easier job in driving up hills or pulling heavy equipment than 2005 Marcos TS.

Compare all specifications:

1975 Chrysler Sedan 2005 Marcos TS
Make Chrysler Marcos
Model Sedan TS
Year Released 1975 2005
Engine Position Front Front
Engine Size 4342 cc 2544 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line V
Horse Power 200 HP 178 HP
Engine RPM 4800 RPM 6000 RPM
Torque 355 Nm 224 Nm
Torque RPM 2000 RPM 4250 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Number of Doors 4 doors 5 doors
Vehicle Weight 1520 kg 1075 kg
Vehicle Length 5010 mm 4010 mm
Vehicle Width 1890 mm 1690 mm
Vehicle Height 1440 mm 1160 mm
Wheelbase Size 2930 mm 2230 mm