1975 Chrysler Sedan vs. 2010 Mercedes-Benz CLC

To start off, 2010 Mercedes-Benz CLC is newer by 35 year(s). Which means there will be less support and parts availability for 1975 Chrysler Sedan. In addition, the cost of maintenance, including insurance, on 1975 Chrysler Sedan would be higher. At 4,342 cc (6 cylinders), 1975 Chrysler Sedan is equipped with a bigger engine. In terms of performance, 1975 Chrysler Sedan (200 HP @ 4800 RPM) has 19 more horse power than 2010 Mercedes-Benz CLC. (181 HP @ 5500 RPM). In normal driving conditions, 1975 Chrysler Sedan should accelerate faster than 2010 Mercedes-Benz CLC. With that said, vehicle weight also plays an important factor in acceleration. 1975 Chrysler Sedan weights approximately 55 kg more than 2010 Mercedes-Benz CLC. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1975 Chrysler Sedan (355 Nm @ 2000 RPM) has 105 more torque (in Nm) than 2010 Mercedes-Benz CLC. (250 Nm @ 5000 RPM). This means 1975 Chrysler Sedan will have an easier job in driving up hills or pulling heavy equipment than 2010 Mercedes-Benz CLC. 1975 Chrysler Sedan has automatic transmission and 2010 Mercedes-Benz CLC has manual transmission. 2010 Mercedes-Benz CLC will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1975 Chrysler Sedan will be easier to drive especially in heavy traffic.

Compare all specifications:

1975 Chrysler Sedan 2010 Mercedes-Benz CLC
Make Chrysler Mercedes-Benz
Model Sedan CLC
Year Released 1975 2010
Body Type Sedan Sedan
Engine Position Front Front
Engine Size 4342 cc 1795 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 200 HP 181 HP
Engine RPM 4800 RPM 5500 RPM
Torque 355 Nm 250 Nm
Torque RPM 2000 RPM 5000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Automatic Manual
Number of Doors 4 doors 4 doors
Vehicle Weight 1520 kg 1465 kg
Vehicle Length 5010 mm 4460 mm
Vehicle Width 1890 mm 1730 mm
Vehicle Height 1440 mm 1410 mm
Wheelbase Size 2930 mm 2720 mm