1975 Chrysler Valiant vs. 1965 Moretti Coupe

To start off, 1975 Chrysler Valiant is newer by 10 year(s). Which means there will be less support and parts availability for 1965 Moretti Coupe. In addition, the cost of maintenance, including insurance, on 1965 Moretti Coupe would be higher. At 3,522 cc (6 cylinders), 1975 Chrysler Valiant is equipped with a bigger engine. In terms of performance, 1975 Chrysler Valiant (138 HP @ 4400 RPM) has 114 more horse power than 1965 Moretti Coupe. (24 HP @ 5100 RPM). In normal driving conditions, 1975 Chrysler Valiant should accelerate faster than 1965 Moretti Coupe. With that said, vehicle weight also plays an important factor in acceleration. 1975 Chrysler Valiant weights approximately 885 kg more than 1965 Moretti Coupe. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1975 Chrysler Valiant (272 Nm @ 1800 RPM) has 233 more torque (in Nm) than 1965 Moretti Coupe. (39 Nm @ 3800 RPM). This means 1975 Chrysler Valiant will have an easier job in driving up hills or pulling heavy equipment than 1965 Moretti Coupe.

Compare all specifications:

1975 Chrysler Valiant 1965 Moretti Coupe
Make Chrysler Moretti
Model Valiant Coupe
Year Released 1975 1965
Engine Size 3522 cc 590 cc
Engine Cylinders 6 cylinders 2 cylinders
Engine Type in-line in-line
Horse Power 138 HP 24 HP
Engine RPM 4400 RPM 5100 RPM
Torque 272 Nm 39 Nm
Torque RPM 1800 RPM 3800 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 1405 kg 520 kg
Vehicle Length 4900 mm 3350 mm
Vehicle Width 1890 mm 1370 mm
Vehicle Height 1420 mm 1260 mm
Wheelbase Size 2830 mm 1850 mm