1975 Citroen GS vs. 1991 Mercury Capri
To start off, 1991 Mercury Capri is newer by 16 year(s). Which means there will be less support and parts availability for 1975 Citroen GS. In addition, the cost of maintenance, including insurance, on 1975 Citroen GS would be higher. At 1,598 cc (4 cylinders), 1991 Mercury Capri is equipped with a bigger engine. In terms of performance, 1991 Mercury Capri (100 HP @ 5750 RPM) has 45 more horse power than 1975 Citroen GS. (55 HP @ 6500 RPM) In normal driving conditions, 1991 Mercury Capri should accelerate faster than 1975 Citroen GS. With that said, vehicle weight also plays an important factor in acceleration. 1991 Mercury Capri weights approximately 190 kg more than 1975 Citroen GS. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 Mercury Capri (131 Nm @ 5500 RPM) has 59 more torque (in Nm) than 1975 Citroen GS. (72 Nm @ 3500 RPM). This means 1991 Mercury Capri will have an easier job in driving up hills or pulling heavy equipment than 1975 Citroen GS.
Compare all specifications:
1975 Citroen GS | 1991 Mercury Capri | |
Make | Citroen | Mercury |
Model | GS | Capri |
Year Released | 1975 | 1991 |
Engine Position | Front | Front |
Engine Size | 1014 cc | 1598 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | boxer | in-line |
Horse Power | 55 HP | 100 HP |
Engine RPM | 6500 RPM | 5750 RPM |
Torque | 72 Nm | 131 Nm |
Torque RPM | 3500 RPM | 5500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Vehicle Weight | 890 kg | 1080 kg |
Vehicle Length | 4130 mm | 4230 mm |
Vehicle Width | 1620 mm | 1650 mm |
Vehicle Height | 1360 mm | 1290 mm |
Wheelbase Size | 2560 mm | 2410 mm |