1975 Dodge Aspen vs. 1998 Nissan President

To start off, 1998 Nissan President is newer by 23 year(s). Which means there will be less support and parts availability for 1975 Dodge Aspen. In addition, the cost of maintenance, including insurance, on 1975 Dodge Aspen would be higher. At 5,898 cc (8 cylinders), 1975 Dodge Aspen is equipped with a bigger engine. In terms of performance, 1998 Nissan President (267 HP @ 5600 RPM) has 94 more horse power than 1975 Dodge Aspen. (173 HP @ 4000 RPM) In normal driving conditions, 1998 Nissan President should accelerate faster than 1975 Dodge Aspen. With that said, vehicle weight also plays an important factor in acceleration. 1998 Nissan President weights approximately 295 kg more than 1975 Dodge Aspen. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1998 Nissan President (394 Nm @ 4000 RPM) has 14 more torque (in Nm) than 1975 Dodge Aspen. (380 Nm @ 2400 RPM). This means 1998 Nissan President will have an easier job in driving up hills or pulling heavy equipment than 1975 Dodge Aspen.

Compare all specifications:

1975 Dodge Aspen 1998 Nissan President
Make Dodge Nissan
Model Aspen President
Year Released 1975 1998
Engine Position Front Front
Engine Size 5898 cc 4494 cc
Engine Cylinders 8 cylinders 8 cylinders
Engine Type in-line in-line
Horse Power 173 HP 267 HP
Engine RPM 4000 RPM 5600 RPM
Torque 380 Nm 394 Nm
Torque RPM 2400 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 1595 kg 1890 kg
Vehicle Length 5200 mm 5230 mm
Vehicle Width 1840 mm 1840 mm
Vehicle Height 1410 mm 1430 mm
Wheelbase Size 2870 mm 3040 mm